B.O.P. Drills

Date: Date: / MM / DD YYYY
Company

Company Aera Energy - Belridge Aera Energy - Coalinga Aera Energy - Midway Aera Energy - San Ardo Berry Corporation - Hill Berry Corporation - M/N Berry Corporation - M/S Berry Corporation - Placerita Berry Corporation - Poso CAL-NRG Cavern Solutions Chevron CRC - (Sacramento) CRC - (SJ-N) CRC - (SJ-S) CRC - (SJ-S) Elk Hills Crimson E&B Natural Resources Holmes Western San Joaquin Facilities Management Sentinel Peak Resources TRC Other / Not Listed Other / Not Listed
Rig/Equipment Number:
Lease / Well Number:
Safety Representative
Pre-Drill

The purpose of the drill is to simulate the actual conditions a crew would face during a loss of well control event. The supervisor or safety supervisor shall construct a drill by choosing one or more of the following variables. Subsequent drills shall focus on a different scenario than the one practiced the previous time. Construct a scenario by choosing at least one box in each column. Since the crew is not responding to an actual loss of well control event, certain steps shall be simulated only. (If killing the rig engine and any remaining engines is part of the drill scenario, the emergency kill switch (es) shall only be activated while the engine is running at an idle.)
What drill are you preforming?

What drill are you preforming? Nothing in the Well Rod Operations Tubing Operations
Nothing in the Well

Please answer the following questions:
Casing Considerations

Casing Considerations Casing Flowing Casing not Flowing Casing Gassing Casing not gassing
Where are personnel located?

Where are personnel located? Derrick worker in the derrick Derrick worker not in the derrick Crew worker(s) on the work floor Crew worker(s) not on the work floor Supervisor on location Supervisor not on location Customer representative on location Customer representative not on location
Other

Other H2S present H2S not present LEL alarm sounding LEL alarm not sounding Engine "running away" Engine not "running away" Other Other
Rod Operations

Please answer the following questions:
What’s in the Well?

What’s in the Well? Rod pump at Surface K-Bars at Surface Rods in the Hole Rods Stuck Rod Guides Rods Parted
Tubing and Casing Considerations

Tubing and Casing Considerations Tubing Flowing Tubing not Flowing Casing Flowing Casing not Flowing Tubing Gassing Tubing not Gassing Casing Gassing Casing not Gassing
Where is Personnel Located?

Where is Personnel Located? Derrick Worker in the Derrick Derrick worker not in the Derrick Crew worker(s) on the Work Floor Crew worker(s) not on the Work Floor Supervisor on Location Supervisor not on Location Customer representative on Location Customer representative not on Location
Other

Other H2S Present H2S not Present LEL Alarm Sounding LEL Alarm not Sounding Engine "Running Away" Engine not "Running Away" Other Other
Tripping Tubing

Please answer the following questions:
What’s in the Well?

What’s in the Well? Picking up/laying down singles Tripping Tubing Tapered string 3 1/2” and 2 7/8” Other Other
Tubing and Casing Considerations

Tubing and Casing Considerations Tubing Flowing Tubing not Flowing Tubing Stuck Casing Flowing Casing not Flowing Tubing Gassing Tubing not Gassing Casing Gassing Casing not Gassing
Where is Personnel Located?

Where is Personnel Located? Derrick Worker in the Derrick Derrick worker not in the Derrick Crew worker(s) on the Work Floor Crew worker(s) not on the Work Floor Supervisor on Location Supervisor not on Location Customer representative on Location Customer representative not on Location
Other

Other H2S Present H2S not Present LEL Alarm Sounding LEL Alarm not Sounding Engine "Running Away" Engine not "Running Away" Other Other
The crew shall proceed to the designated evacuation point and follow GPS SOP's 3.3 and 20.2 before resuming work.
Drill

After choosing a scenario, the supervisor or safety supervisor shall inform the HWP that a drill is commencing. Once having been informed that a drill is in progress, the crew chief and crew shall take the appropriate steps to control the well.

Enter Drill Time (i.e 0:2:25 would be 2 minutes 25 Seconds)
Total Drill Time Total Drill Time : HH : MM SS
Analysis - Nothing in the Well


	Yes	No	N/A
Did the HWP alert the crew that a kick was in progress?	Did the HWP alert the crew that a kick was in progress?Yes	Did the HWP alert the crew that a kick was in progress?No	Did the HWP alert the crew that a kick was in progress?N/A
Did the HWP kill the rig engine prior to leaving the operator’s station?	Did the HWP kill the rig engine prior to leaving the operator’s station?Yes	Did the HWP kill the rig engine prior to leaving the operator’s station?No	Did the HWP kill the rig engine prior to leaving the operator’s station?N/A
Did the HWP or assigned crew worker close the applicable preventer?	Did the HWP or assigned crew worker close the applicable preventer?Yes	Did the HWP or assigned crew worker close the applicable preventer?No	Did the HWP or assigned crew worker close the applicable preventer?N/A
Did the HWP direct the crewmembers to kill any remaining engines using the emergency kill switches prior to the crew members assembling at the briefing area?	Did the HWP direct the crewmembers to kill any remaining engines using the emergency kill switches prior to the crew members assembling at the briefing area?Yes	Did the HWP direct the crewmembers to kill any remaining engines using the emergency kill switches prior to the crew members assembling at the briefing area?No	Did the HWP direct the crewmembers to kill any remaining engines using the emergency kill switches prior to the crew members assembling at the briefing area?N/A
Did the HWP confirm that the well was shut-in?	Did the HWP confirm that the well was shut-in?Yes	Did the HWP confirm that the well was shut-in?No	Did the HWP confirm that the well was shut-in?N/A
Did the HWP post the “BOP Open/Closed” sign?	Did the HWP post the “BOP Open/Closed” sign?Yes	Did the HWP post the “BOP Open/Closed” sign?No	Did the HWP post the “BOP Open/Closed” sign?N/A
Did the crew leave leaks unattended until pressure was relieved?	Did the crew leave leaks unattended until pressure was relieved?Yes	Did the crew leave leaks unattended until pressure was relieved?No	Did the crew leave leaks unattended until pressure was relieved?N/A
Did all crewmembers assemble at the briefing area?	Did all crewmembers assemble at the briefing area?Yes	Did all crewmembers assemble at the briefing area?No	Did all crewmembers assemble at the briefing area?N/A
Did the HWP notify the supervisor.	Did the HWP notify the supervisor.Yes	Did the HWP notify the supervisor.No	Did the HWP notify the supervisor.N/A
Did the HWP obtain the "Shut-in casing pressure, and "Time of Day" and record it on the rig field report (work ticket)?	Did the HWP obtain the "Shut-in casing pressure, and "Time of Day" and record it on the rig field report (work ticket)?Yes	Did the HWP obtain the "Shut-in casing pressure, and "Time of Day" and record it on the rig field report (work ticket)?No	Did the HWP obtain the "Shut-in casing pressure, and "Time of Day" and record it on the rig field report (work ticket)?N/A

Analysis - Rod Operations


	Yes	No	N/A
Did the HWP alert the crew that a kick was in progress?	Did the HWP alert the crew that a kick was in progress?Yes	Did the HWP alert the crew that a kick was in progress?No	Did the HWP alert the crew that a kick was in progress?N/A
Did the HWP kill the rig engine prior to leaving the operator’s station?	Did the HWP kill the rig engine prior to leaving the operator’s station?Yes	Did the HWP kill the rig engine prior to leaving the operator’s station?No	Did the HWP kill the rig engine prior to leaving the operator’s station?N/A
Did the HWP direct the crewmembers to kill any remaining engines using the emergency kill switches prior to the crew members assembling at the briefing area?	Did the HWP direct the crewmembers to kill any remaining engines using the emergency kill switches prior to the crew members assembling at the briefing area?Yes	Did the HWP direct the crewmembers to kill any remaining engines using the emergency kill switches prior to the crew members assembling at the briefing area?No	Did the HWP direct the crewmembers to kill any remaining engines using the emergency kill switches prior to the crew members assembling at the briefing area?N/A
Did the HWP pick-up and position the rod string so that the connections were clear of the rod BOP and were accessible from the workfloor, if possible?	Did the HWP pick-up and position the rod string so that the connections were clear of the rod BOP and were accessible from the workfloor, if possible?Yes	Did the HWP pick-up and position the rod string so that the connections were clear of the rod BOP and were accessible from the workfloor, if possible?No	Did the HWP pick-up and position the rod string so that the connections were clear of the rod BOP and were accessible from the workfloor, if possible?N/A
Did the HWP or the assigned crew worker HWP close the rod BOP?	Did the HWP or the assigned crew worker HWP close the rod BOP?Yes	Did the HWP or the assigned crew worker HWP close the rod BOP?No	Did the HWP or the assigned crew worker HWP close the rod BOP?N/A
Did the HWP allow the tubing pressure to vent down the production line?	Did the HWP allow the tubing pressure to vent down the production line?Yes	Did the HWP allow the tubing pressure to vent down the production line?No	Did the HWP allow the tubing pressure to vent down the production line?N/A
Did all crewmembers assemble at the briefing area?	Did all crewmembers assemble at the briefing area?Yes	Did all crewmembers assemble at the briefing area?No	Did all crewmembers assemble at the briefing area?N/A
Did the HWP notify the supervisor.	Did the HWP notify the supervisor.Yes	Did the HWP notify the supervisor.No	Did the HWP notify the supervisor.N/A
Did the HWP obtain the "Shut-in casing pressure", "Shut-in Tubing Pressure", and "Time of Day" and record it on the rig field report (work ticket)?	Did the HWP obtain the "Shut-in casing pressure", "Shut-in Tubing Pressure", and "Time of Day" and record it on the rig field report (work ticket)?Yes	Did the HWP obtain the "Shut-in casing pressure", "Shut-in Tubing Pressure", and "Time of Day" and record it on the rig field report (work ticket)?No	Did the HWP obtain the "Shut-in casing pressure", "Shut-in Tubing Pressure", and "Time of Day" and record it on the rig field report (work ticket)?N/A

Analysis - Tripping Tubing


	Yes	No	N/A
Did the HWP alert the crew that a kick was in progress?	Did the HWP alert the crew that a kick was in progress?Yes	Did the HWP alert the crew that a kick was in progress?No	Did the HWP alert the crew that a kick was in progress?N/A
Did the HWP kill the rig engine prior to leave the operator’s station?	Did the HWP kill the rig engine prior to leave the operator’s station?Yes	Did the HWP kill the rig engine prior to leave the operator’s station?No	Did the HWP kill the rig engine prior to leave the operator’s station?N/A
Did the HWP post the “BOP Open/Closed” sign?	Did the HWP post the “BOP Open/Closed” sign?Yes	Did the HWP post the “BOP Open/Closed” sign?No	Did the HWP post the “BOP Open/Closed” sign?N/A
Did the HWP direct the crewmembers to kill any remaining engines using the emergency kill switches prior to the crew members assembling at the briefing area?	Did the HWP direct the crewmembers to kill any remaining engines using the emergency kill switches prior to the crew members assembling at the briefing area?Yes	Did the HWP direct the crewmembers to kill any remaining engines using the emergency kill switches prior to the crew members assembling at the briefing area?No	Did the HWP direct the crewmembers to kill any remaining engines using the emergency kill switches prior to the crew members assembling at the briefing area?N/A
Did the HWP position the work string so that the connections were clear of the BOP stack sealing elements and so that the connections were accessible from the work floor?	Did the HWP position the work string so that the connections were clear of the BOP stack sealing elements and so that the connections were accessible from the work floor?Yes	Did the HWP position the work string so that the connections were clear of the BOP stack sealing elements and so that the connections were accessible from the work floor?No	Did the HWP position the work string so that the connections were clear of the BOP stack sealing elements and so that the connections were accessible from the work floor?N/A
Did the HWP direct the crew worker(s) to ensure that the FOSV/TIW valve was in the “open” position?	Did the HWP direct the crew worker(s) to ensure that the FOSV/TIW valve was in the “open” position?Yes	Did the HWP direct the crew worker(s) to ensure that the FOSV/TIW valve was in the “open” position?No	Did the HWP direct the crew worker(s) to ensure that the FOSV/TIW valve was in the “open” position?N/A
Did the HWP direct the crew worker(s) to install and close the FOSV/TIW valve?	Did the HWP direct the crew worker(s) to install and close the FOSV/TIW valve?Yes	Did the HWP direct the crew worker(s) to install and close the FOSV/TIW valve?No	Did the HWP direct the crew worker(s) to install and close the FOSV/TIW valve?N/A
Did the HWP or assigned crew worker close the applicable preventer?	Did the HWP or assigned crew worker close the applicable preventer?Yes	Did the HWP or assigned crew worker close the applicable preventer?No	Did the HWP or assigned crew worker close the applicable preventer?N/A
Did the HWP confirm that the well was shut-in?	Did the HWP confirm that the well was shut-in?Yes	Did the HWP confirm that the well was shut-in?No	Did the HWP confirm that the well was shut-in?N/A
Did all crewmembers assemble at the briefing area?	Did all crewmembers assemble at the briefing area?Yes	Did all crewmembers assemble at the briefing area?No	Did all crewmembers assemble at the briefing area?N/A
Did the HWP notify the supervisor.	Did the HWP notify the supervisor.Yes	Did the HWP notify the supervisor.No	Did the HWP notify the supervisor.N/A
Did the HWP obtain the "Shut-in casing pressure", "Shut-in Tubing Pressure", and "Time of Day" and record it on the rig field report (work ticket)?	Did the HWP obtain the "Shut-in casing pressure", "Shut-in Tubing Pressure", and "Time of Day" and record it on the rig field report (work ticket)?Yes	Did the HWP obtain the "Shut-in casing pressure", "Shut-in Tubing Pressure", and "Time of Day" and record it on the rig field report (work ticket)?No	Did the HWP obtain the "Shut-in casing pressure", "Shut-in Tubing Pressure", and "Time of Day" and record it on the rig field report (work ticket)?N/A

Shut-In Casing Pressure (SICP)
Shut-In Tubing Pressure (SITP)
Time of Day Time of Day : HH MM AM/PM
Review

The supervisor or safety supervisor shall reinforce good performance and discuss deficiencies. The total drill time shall be announced.
Summary / Comments:
Crew-member Details
How many Crew-members on-site (not including Supervisor)?

How many Crew-members on-site (not including Supervisor)? 2 3 4
Enter Crew Details
HWP HWP First Last
WP-2 WP-2 First Last
WP-3 WP-3 First Last
WP-4 WP-4 First Last
Preparers Name Preparers Name First Last
Preparers Signature

Draw or Type

Clear

Full Name

B.O.P. Drills

B.O.P. Drills

Pre-Drill

Nothing in the Well

Rod Operations

Tripping Tubing

The crew shall proceed to the designated evacuation point and follow GPS SOP's 3.3 and 20.2 before resuming work.

Drill

Analysis - Nothing in the Well

Analysis - Rod Operations

Analysis - Tripping Tubing

Review

Crew-member Details