GPS Rigs - KPI

v2.0.2

Date Job Completed Date Job Completed / MM / DD YYYY
Tracking Start Time Tracking Start Time : HH : MM SS
TIER I - KPI OPTIONS
Name of GPS Employee Name of GPS Employee First Last
Company
KPI Type

KPI Type Tier I Tier II
Equipment#
Type of Work

Type of Work Production Workover* Plug & Abandonment Plug & Abandonment (Bid) Compliance* Re-Abandonment
CUSTOMER WELL DETAILS
Field
Lease
Section
Well Name
Well API #

Only Numbers
Well Type
Well BOE

Barrel of Oil Equivalent (Only Numbers)
Well Depth

All depths in Feet.
WELL WORK PARAMETERS

Only enter the Total Production String.
# Joints Pulled

If none enter 0 zero.
# Joints Ran

If none enter 0 zero.
Tubing Tail Pulled (Depth)

(Auto Calculated)
All depths in Feet.
Tubing Tail Ran (Depth)

(Auto Calculated)
All depths in Feet.
# Rods Pulled

If none enter 0 zero.
# Rods Ran

If none enter 0 zero.
Rods Pulled (Depth)

(Auto Calculated)
All depths in Feet.
Rods Ran (Depth)

(Auto Calculated)
All depths in Feet.
Total Rig Hours Billed?
Must be between 5 and 6 characters. Currently Entered: 0 characters.
NOTE: If you selected "Production" This time does NOT have to match with the Total KPI time.

Please enter time based on the conventional format where hours and minutes are separated by a colon (e.g., 1:30 for 1 hour and 30 minutes).

Here's a quick reference:

8.50 hours should be entered as 08:30.
9.25 hours should be entered as 09:15.
7.75 hours should be entered as 07:45.

Thank you for your cooperation!
Failure Type

Failure Type Tubing Pump Rod Regulatory
Job Type

Job Type P/C T&T Sanded PFS RTPAS PFS-CIT PFS w/Cups RTPAS w/Cups HIT MIT-1 MIT-2 Low Prod. Parted Rod/Tubing Laydown Surface Maintanance Other Other
TIER II - KPI OPTIONS
Job Step

Job Step Secure MIRU WCO Travel Rod Pull BOP Install TBG Pull TAG Clean TBG Run BOP Remove Rod Run RDMO Stuck Tubing Fishing Pressure Testing Power Swivel Scraper Bridge Plug Camera Wireline Drill Collars Washover Pipe Specialty Job Specialty Job
SECURE

Includes: Unload Tools - Beginning Of Day / Load Tools Close In & Secure Well - End Of Day.
Secure Time

Secure Time Yes
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
Secure Total Time
HSE

Includes: JSA-Safety Activity (includes Rig Inspection) / Meet & Greet (Include operations on hold for audit/observations) / Environmental Clean up of location / BOP Drill for CalGem and Safety.
HSE Time

HSE Time Yes
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
HSE Total Time
MIRU

Includes: Road Rig / Rig Up (LOTO, Stage parts and tools, spot rig and remove horse head).
MIRU Time

MIRU Time Yes
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
MIRU Total Time
WCO

Includes: Bleed Well, Kill Well, Well Control.
WCO Time

WCO Time Yes
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
WCO Total Time
TRAVEL

Includes: Crew Travel Time (Beginning of Day) / Crew Travel Time (End of Day).
Travel Time

Travel Time Yes
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
Travel Total Time
ROD PULL

Test well (Tubing/ Pump/ Rods/ Valves) /Unseat pump, POOH with rods stood back, POOH and lay down ENTIRE rod string.
Rod Pull Time

Rod Pull Time Yes
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
Rod Pull Total Time
BOP INSTALL

NU BOP Install
BOP Install Time

BOP Install Time Yes
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
BOP Install Total Time
TUBING PULL

Blow TBG Drain, POOH with kill string, Lay down entire string, POOH with TBG and Stand Back Tubing (includes R/U and R/D tools).
Tubing Pull Time

Tubing Pull Time Yes
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
Tubing Pull Total Time
TAG & CLEAN

Tag Well, Clean out well Bailing, Clean out well - Circulate.
Tag & Clean Time

Tag & Clean Time Yes
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
Tag & Clean Total Time
Tubing Run

Pick up and RIH with ENTIRE TBG string R/U and R/D of TBG tools, RIH with TBG from derrick total joints (R/U and R/D Tools), RIH with Kill String.
Tubing Run Time

Tubing Run Time Yes
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
Tubing Run Total Time
BOP REMOVAL

ND BOP Remove - R/D floor/ Donut/ Flange.
BOP Removal Time

BOP Removal Time Yes
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
BOP Removal Total Time
ROD RUN

RIH with Rods-Stood Back, Pick up and RIH with ENTIRE Rod string, Set, Space and Test Pump.
Rod Run Time

Rod Run Time Yes
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
Rod Run Total Time
RDMO

Hang well on (Install Horses Head), RDMO / clean location / RTP-open valves, start well.
RDMO Time

RDMO Time Yes
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
RDMO Total Time
Stuck Tubing
Stuck Tubing Time

Stuck Tubing Time Yes
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
Stuck Tubing Total Time
Fishing
Fishing Time

Fishing Time Yes
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
Fishing Total Time
Pressure Testing
Pressure Testing Time

Pressure Testing Time Yes
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
Pressure Testing Total Time
Power Swivel
Power Swivel Time

Power Swivel Time Yes
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
Power Swivel Total Time
Scraper
Scraper Time

Scraper Time Yes
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
Scraper Total Time
Bridge Plug
Bridge Plug Time

Bridge Plug Time Yes
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
Bridge Plug Total Time
Camera
Camera Time

Camera Time Yes
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
Camera Total Time
Wireline
Wireline Time

Wireline Time Yes
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
Wireline Total Time
Drill Collars
Drill Collars Time

Drill Collars Time Yes
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
Drill Collars Total Time
Washover Pipe
Washover Pipe Time

Washover Pipe Time Yes
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
Washover Pipe Total Time
SPECIALTY / OPTIONAL COMMENTS
Did the above notes require time?

Did the above notes require time? Yes No
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
Specialty Total Time
KPI Options - Total Time

If value contains "NaN" make sure your Time fields contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
Tubing Joints
Do you pull tubing?

Do you pull tubing? Yes No
How many joints pulled?
THIRD PARTY SUPPORT
Was there Third Party Support on this job?

Was there Third Party Support on this job? Yes No
What thrid party support was supplied?

What thrid party support was supplied? Fishing Pump Services Fluids Equipment Safety Other Other
Provide details on third party support provided.
DOWNTIME / TROUBLE TIME
Was there Downtime or Trouble time on this job?

Was there Downtime or Trouble time on this job? Yes No
DOWNTIME / NON-PRODUCTIVE
Is there Downtime / Non-Productive time on this job?

Is there Downtime / Non-Productive time on this job? Yes No
Downtime / Non-Productive Type

Downtime / Non-Productive Type Heat Break Equipment Repair Waiting Pickup/Delivery of Materials Safety Audit Weather
BREAK
DT Break Details
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
DT Break 1 - Total Time
Add Break?

Add Break? Yes
WEATHER
Weather Details
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
Weather - Total Time
PICKUP/DELIVERY OF MATERIALS
NP - Pickup/Delivery Of Materials Details
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
NP - Pickup/Delivery Of Materials - Total Time
SAFETY AUDIT
NP - Safety Audit Details
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
NP - Safety Audit - Total Time
DT Break Details 2
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
DT Break 2 - Total Time
LUNCH
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
DT Lunch - Total Time
HEAT BREAK
DT Heat Break Details
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
DT Heat Break 1 - Total Time
Add Additional Heat Break?

Add Additional Heat Break? Yes
DT Heat Break Details 2
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
DT Heat Break 2 - Total Time
EQUIPMENT REPAIR
DT Equipment Details
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
DT Equipment Repair - Total Time
WAITING ON
DT Waiting on Who?
DT Waiting on What?
DT Waiting on Why?
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
DT Waiting On 1 - Total Time
Add Another "Waiting"?

Add Another "Waiting"? Yes
DT Waiting on Who? 2
DT Waiting on What? 2
DT Waiting on Why? 2
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
Waiting On 2 - Total Time
Downtime Total Time
TROUBLE
Is there Trouble on this job?

Is there Trouble on this job? Yes No
TROUBLE TIME
TT Explain:
TT What?
TT Why?
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
Trouble 1 - Total Time
Add More "Trouble Time"?

Add More "Trouble Time"? Yes
TT Explain 2:
TT What? 2
TT Why? 2
Enter Time Enter Time : HH MM

Must contain TWO digits for HH and MM. You must enter a leading zero for single digit Hour or Minute. (i.e. 5 min = 00:05 or 1 Hour and 5 mins = 01:05 )
Trouble 2 - Total Time
Trouble Total Time
TIME TOTAL
Overall Total Time
What went Right, what went Wrong.

GPS Rigs - KPI

GPS Rigs - KPI

TIER I - KPI OPTIONS

CUSTOMER WELL DETAILS

WELL WORK PARAMETERS

TIER II - KPI OPTIONS

SECURE

HSE

MIRU

WCO

TRAVEL

ROD PULL

BOP INSTALL

TUBING PULL

TAG & CLEAN

Tubing Run

BOP REMOVAL

ROD RUN

RDMO

Stuck Tubing

Fishing

Pressure Testing

Power Swivel

Scraper

Bridge Plug

Camera

Wireline

Drill Collars

Washover Pipe

SPECIALTY / OPTIONAL COMMENTS

Tubing Joints

THIRD PARTY SUPPORT

DOWNTIME / TROUBLE TIME

DOWNTIME / NON-PRODUCTIVE

TROUBLE

TIME TOTAL